OPTICAL FIBRE SPLICING SHELVES:
We manufacture splicing cabinet, splicing shelves, patching shelves that are easy to handle when working in the central office and head-end fiber distribution frames. These splicing cabinet, splicing shelves, patching shelves can also be used in the remote hub locations, or in telephone equipment rooms on the premises of our esteemed clients. The shelves can be used as stand-alone units, or can be stacked with other interconnect optical cross connect shelves.

We are a leading company, engaged in manufacturing splicing shelves, patching shelves that is a type of mechanical shelf for the fibre management and patching in a rack environment.

The photograph can serve as:

• The patching shelves in case of individual fibre cable.
• The Splicing and patching shelves( using Combination Cassettes) used for splicing as well as patching trays using fanout kits.
• The connections, storage and mechanical protection between pigtails, patchcords, break-out and IFC cables are duly possible with the assistance of these patching shelves. These are widely appreciated for their sturdiness, dimensional accuracy and longer functional life.

We manufacture splicing cabinet fiber termination cabinet which are made from sheet metal cabinets having one or more numbers of splicing shelves. Each splicing shelf can accommodate max. upto 72 fibers. For 72 fiber capacity they are provided with 12 no's of cassettes / splice trays each capable to hold max. 06 no's of fusion spliced joints. They are suitable for mounting on a standard 19” rack or can ETSI Rack

Splicing Shelf:

These splicing cabinet are sheet metal shelves mounted on telescopic slides able to slide in the front direction and have sufficient storage space for loose tubes of the O.F cable before they enter into splice trays / cassettes and required numbers of splice trays/cassettes are provided each having the capacity o hold 06 no's of spliced fiber joints. The splice trays are made up of ABS.

We manufacture 19"/21" rack mountable DDM in the following models: Model NO. SE-DDM-16-R Model NO. SE-DDM-32-R Description: Digital Distribution Module consists of metal base suitable for mounting on 19/1 / ETSI rack having a capacity of 16 E1's 32 E1's for 2 Mb/s termination. It can cater for max. 16/32 set of trans and receive terminations.

Configuration:

Digital distribution module configuration is given below.

• DDM 120 OHM FOR 16El'S : 4PCB's per module having total16 sets of trans and receive terminations.
• DDM 120 OHM FOR 32El'S : 8PCB's per module having total 32 sets of trans and receive terminations.

We fabricate silver line telecom shelters which are designed to provide controlled environment inside them for housing equipments. These are capable of withstanding extremely harsh environment conditions. They provide completely modular, rigid and composite enclosure for housing the entire communication equipment for cell sites, broadband networks and other access network requirements. These can be installed on roof- top or on ground level at a communication station. These are easy to transport and quick to assemble and erect at site. Panels are placed /joined together using tongue and groove joint and Cam locks provided are applied to obtain uniform continuity of structure. Rubber-silicon sealants are applied at the joints to now obtain moisture proof and air infiltration proof wall.

Sandwich panels are supplied with following skin options:

• 0.5/0.6 mm Pre coated Galvanized Steel sheet
• Bare or Zincalume sheets
• Stainless Steel sheets
• FRP on one side and Pre coated G I. Steel sheet on the other side

Technical Specifications:

• Panel Thickness : ( Typical )
• Side & Roof Panels : 60 mm or 80 mm
• Floor panels : 80 mm (with/without marine ply and adequately strengthened.

The shelters can be supplied tailor made as per order. Most commonly used sizes are:

• 4000 mm x 2500 mm x 2750 mm (internal/external)
• 3000 mm x 2500 mm x 2750 mm (internal/external)
• 2700 mm x 1990 mm x 2600 mm (internal/external)

The system comes with the following accessories:

• Grounding
• Cable Entry Plate
• Electrical System
• Lightening/Surge Protection
• Security- Alarms Fire Suppression